Kwik-Strip Sprayable Fast Paint & Varnish Stripper & Remover Quart works in 15 minutes to strip multiple layers fast. Use on wood, metal and masonry. DIRECTIONS FOR USE: Shake well. Pour into sprayer bottle and tighten sprayer to bottle. With bottle in upright position, turn spray nozzle away from you and adjust nozzle to desired spray pattern. Apply an even, liberal coat of stripper to a small area (up to 3 ft. x 3 ft.). Leave the area and let the stripper do the work. After 15 minutes, test scrape a small area to see if finish is ready for removal. Remove loosened finish by gently scraping in direction of wood grain with a plastic stripping tool. A toothbrush, or stripping brush will help remove old finish buried in recesses. Multiple coats may require repeat application. Use a abrasive pad dipped in After Wash or Odorless Mineral Spirits to loosen remaining finish and remove residue. Surface should be clean & dry before applying new finish. Not for sale in South Coast
WARNING: This product can expose you to Ethylbenzene, which is known to the State of California to cause cancer, and Methanol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.